TC HK-H-H99-25 High Performance Ev Charger 1.8KW

HK-H series 1.8KW charger was specially designed, by Hangzhou Tiecheng Info&Tech Co., Ltd for supplying the electricity for electric vehicle’s power battery , on the basis of the national standards for the charger.

 This product has the advantages of not only only high efficiency, small size, high stability, long lifespan, but also high protection grade, and high reliability and complete protection function, etc. It’s definitely an ideal charging power supply for f electric vehicles.

This charger has built-in heat-sensing device and can automatic recover through the thermal protection.  Fully sealed  potting  process  and  up to  IP67  protection  level ensures  no causing trouble in any complex environment .

Model Number: 1.8KW HK-H-H99-25
Brand Name: TC Charger
HK Series 48V 72V 96V 1.8KW on Board Battery Charger Electric Vehicle charger 
IP Grade  :IP67 Waterptoof    
With connectors and terminals included
Certicate ：CE /IATF/ISO9001 Quality control    
Warranty Time : 3 years
Efficiency :  >98%    
Programmable: Enable or With CAN communication

Suitable Battery Type:Lithium/LiFepo4    
Portable/On-Off Board Type
Input range :90-265V    
Output DC :18V- 132V
Cooling system: Air cool /Fan Cool/Water/Liquid cool
Max Output volt current: 13A 132V Max
Use Application: Electric Vhicle/Car/Trunk/Forklift/Hybrid EV

Choose the accessories according to the actual needs

1). Thermal Sensor Interface (for lead-acid battery charger)

Thermal Sensor is recommanded to lead-acid battery charger,to detect the temperature of thebattery and compensate charging voltage, at the same time to realize the battery overheat protection  function.  Suggest  that  the  thermal  sensor  is  fixed  on  the  cell  of  the  highest temperature. When the thermal sensor is not easy to install on the battery, you can fix the temperature sensor directly to the position that can detect the environmental temperature. Note that it shall not be affected by heat coming from the charger.

2). 12V Output

Charger provides a rating voltage 12V0.2A signal output. Its electrical connections is isolated from the interior circuit of the charger for external application function extension. Note that

this 12V with LED indicator output interface are common-grounded. The independent  12V output can supply power for the battery management system. Output 12V-5A

3). LED Output Interface

Charger provides Red, Green two LED interface or Red, Yellow, Green three LED interface. Its electrical connections is isolated from the interior circuit of the battery charger for external application function extension.

4). ENABLE Signal (for Lithium battery charger):    External control circuit must be independent circuit

As for lithium battery charger, it’s essential to use an enable signal to control the charger’s work

or close. Isolated circuit (such as Relay or Optocoupler) shall be adopted to control the charger’s work or close. Note that if the control circuit is not independent, it lead to damage of the charger.

5). Charging Lock up Signal 

Charger provides a set of relay normally closed contact as charging locking signal output. W hen the charger has no electricity, the contact connects, while the charger connects to the AC power supply,  the  contact  disconnects  immediately.  The  rated  current  of  contact  is  1A,  withstand voltage 30VDC / 250VAC.